heras fence
Why and where are heras fence used?
Heras temporary fence panel is a kind of temporary fence weld with galvanized wires and steel tubes. These panels are assembled with the aid of couplers and rubber fencing feet, easy to install and maintain.
They are sturdy enough and perfect for securing construction sites, often used for fencing-off site perimeters, securing equipment and directing the public away from unsafe construction site areas. They are also an extremely popular form of wire event fencing and maintenance work fence.
heras temporary fencing system
APAC offers the ultimate market-leading temporary fencing system. The weight makes this fence suitable for installation by one person, which means setting up and dismantling are much easier.
The mesh is completely strong and stands up against the caprices of weather, the harshness of various types of sites, and human interference.
heras fence SYSTEM COMPONENTS
Heras fence panel
Galvanized wire mesh welding on a steel frame，more security and durable
heras fence feet
Rubber block fence feet, act as ground supports for the Heras fence panels
Heras fence clip
Two shields with a screw, tightened on the side of fence panels for security
heras fence covers
Visual Blockout whilst also allowing for wind to pass through the fence panels
Heras Fence - Security fencing Solutions
heras fence panel
with square top
A classic mobile fence panel developed for customers who need affordable security fencing in less risky locations. The tubes are welded on all sides. The pre-galvanized wire mesh does not leave any protruding points behind the frame. Reinforced corner plates are available for extra option.
heras fence panel
with Round Top
The square top temporary fence panels have weld joins in each corner. These corners are the weakest part of the panel. A round-top temporary fencing panel frame will be able to bend at the top. It will not break at the top corners, stronger than four tubes made up frame.
quality heras panels for superior performance, durability
Our Heras fence panels are ideal for use on construction sites. Normal dimensions are 2.0m high x 3.5m wide. The mesh infill is designed to allow wind to pass through the panels keeping the fencing sturdy in the most testing of weather conditions. The pre-galvanized finishing keeps the panels not rusting for a long time.
All our heras fence panels are constructed from fully galvanized steel, strengthened with Smartweld technology on every joint and wire of the panel mesh (creating a mesh that is stronger than industry-standard MIG welded mesh).
The heras temporary fence panels consist of BS EN 10244-2 Standard, with the options of horizontal and vertical center tubes.
All heras fences can be delivered directly to your site at an affordable price.
Econo Lightweight Round Top Panel
Welded-in bottom corner pieces for more sturdiness
Dimensione: 3500 x 2000 mm
Frame Tube: Ø38 mm x 1.5mm
Mesh width: 132.5 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Standard Lightweight Round Top Panel
Smaller mesh size, stronger and makes the span more rigid
Dimensione: 3500 x 2000 mm
Frame Tube: Ø38 mm x 1.5mm
Mesh width: 100 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Heavy Duty
Round Top Panel
Made of thicker steel wires, stronger and more stable
Dimensione: 3500 x 2000 mm
Frame Tube: Ø38 mm x 1.5mm
Mesh width: 100 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø3.2mm
ANTICLIMB
Round Top Panel
Steel mesh grid is smaller, anticlimb and high protective
Dimensione: 3500 x 2000 mm
Frame Tube: Ø38 mm x 1.5mm
Mesh width: 43 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Horizontal Reinforced Round Top Panel
Frame reinforced of additional horizontal stabilizing tube
Dimensione: 3500 x 2000 mm
Frame Tube: Ø38 mm x 1.5mm
Reinforcement pipe: Ø 38 mm
Mesh width: 100 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Vertical Reinforced Round Top Panel
Frame reinforced of additional vertical stabilizing tube
Dimensione: 3500 x 2000 mm
Frame Tube: Ø38 mm x 1.5mm
Reinforcement pipe: Ø 38 mm
Mesh width: 100 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
horizontal stabilizing anticlimb
Roundtop Panel
Frame reinforced and smaller mesh infilling
Dimensione: 3500 x 2000 mm
Frame Tube: Ø38 mm x 1.5mm
Reinforcement pipe: Ø 38 mm
Mesh width: 43 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
vertical stabilizing anticlimb
Roundtop Panel
Vertical tubular reinforcement and anticlimb
Dimensione: 3500 x 2000 mm
Frame Tube: Ø38 mm x 1.5mm
Reinforcement pipe: Ø 38 mm
Mesh width: 43 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Econo Lightweight Square Top Panel
Openwork construction fence with rectangular tubular frame
Dimensione: 3500 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø25 mm x 1.2mm
Single infilling: 132.5 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Standard Lightweight Square Top Panel
Square top panel, smaller mesh size, more dense filling
Dimensione: 3500 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø25 mm x 1.2mm
Single infilling: 100 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Heavy Duty
Square Top Panel
Ø3.2mm steel wires for more sturdy,
Dimensione: 3500 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø30 mm x 1.2mm
Single infilling: 100 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø3.2mm
Reinforced Corner Square Top Panel
Rectangular tubular frame reinforced at the four corners
Dimensione: 3500 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø30 mm x 1.2mm
Single infilling: 100 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Heavy Duty Short
Square Top Panel
Shorter span for where it is not possible to use a full-size fence
Dimensione: 2200 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø30 mm x 1.2mm
Single infilling: 100x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø3.2mm
ANTICLIMB
Square Top Panel
Higher protective barrier, resistant to climb, more stable
Dimensione: 3500 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø30 mm x 1.2mm
Single infilling: 43 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Horizontal Reinforced Square Top Panel
Horizontal structural strength , more resistant to overload
Dimensione: 3500 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø30 mm x 1.2mm
Reinforcement pipe: Ø 30 mm
Mesh width: 100 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
Vertical Reinforced Square Top Panel
Vertical frame reinforced panel for difficult operating conditions
Dimensione: 3500 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø30 mm x 1.2mm
Reinforcement pipe: Ø 30 mm
Mesh width: 100 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
horizontal stabilizing anticlimb
Square Top Panel
Frame reinforced and smaller mesh infilling
Dimensione: 3500 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø30 mm x 1.2mm
Reinforcement pipe: Ø 38 mm
Mesh width: 43 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
vertical stabilizing anticlimb
Square Top Panel
Vertical tubular reinforcement and anticlimb
Dimensione: 3500 x 2000 mm
Vertical Frame: Ø38 mm x 1.5mm
Horizontal Frame: Ø30 mm x 1.2mm
Reinforcement pipe: Ø 30 mm
Mesh width: 43 x 262 mm
Horizontal Wire: Ø3.2mm
Vertical Wire: Ø2.2mm
how we manufacture heras fence
We are a professional manufacturer of heras fence in China, with more than 7 years of experience. We have been in this field for many years and have a lot of experience in producing and marketing high-quality products. We provide one-stop solutions for our clients.
We can offer you the best service at a competitive price! welcome to inquiry!
Quality guarantee
All the raw materials we use are tested before delivery by our QC department to ensure that they meet the required standards.
We have a strict quality control system, from material purchasing to product shipment.
Our QA team is responsible for checking all the raw materials before production and the incoming inspection of finished products. The products will be tested in accordance with the international standard.
We provide customized services for customers according to their needs.
trattamento superficiale per te
Zincatura galvanica
Per quanto riguarda gli acciai, offriamo sia la zincatura a caldo che quella a freddo per la zincatura a caldo.
Prima della zincatura, i metalli vengono immersi in un bagno caustico.
Immersione a caldo: l'acciaio viene immerso in un bagno di zinco fuso per creare strati di lega di zinco resistenti e durevoli. Garantisce la massima protezione contro la corrosione dell'acciaio quando utilizzato all'esterno.
Freddo: lo zinco viene spruzzato sugli acciai in tutte le angolazioni a una velocità controllata per ottenere lo spessore richiesto. Fornisce una protezione di base contro la corrosione per applicazioni in interni.
applications of heras fence
A site that needs temporary protection
Outdoor events which have restricted areas
Temporary building and construction sites
Esplora le nostre categorie di prodotti
perché scegliere APAC
Italian 
English 
Swedish 
Arabic 
German 
French 
Spanish 
