Heras Fence
Temporary fencing solutions for construction sites, event areas and perimeter protection.
Welcome To APAC Builders Equipment
Why And Where Are Heras Fence Used?
Heras temporary fence panel is a kind of temporary fence weld with galvanized wires and steel tubes. These panels are assembled with the aid of couplers and rubber fencing feet, easy to install and maintain.
They are sturdy enough and perfect for securing construction sites, often used for fencing-off site perimeters, securing equipment and directing the public away from unsafe construction site areas. They are also an extremely popular form of wire event fencing and maintenance work fence.
Heras Temporary Fencing System
APAC offers the ultimate market-leading temporary fencing system. The weight makes this fence suitable for installation by one person, which means setting up and dismantling are much easier.
The mesh is completely strong and stands up against the caprices of weather, the harshness of various types of sites, and human interference.
Anti Climb Heras Fencing
Heras Acoustic Fence
Heras Fence System Components
Heras Fence Panel
Galvanized wire mesh welding on a steel frame, more security and durable.
Heras Fence Feet
Rubber block fence feet, act as ground supports for the Heras fence panels.
Heras Fence Clip
Two shields with a screw, tightened on the side of fence panels for security.
Heras Fence Covers
Visual blockout whilst also allowing for wind to pass through the fence panels.
Heras Fence - Security Fencing Solutions
Heras Fence Panel With Square Top
A classic mobile fence panel developed for customers who need affordable security fencing in less risky locations. The tubes are welded on all sides. The pre-galvanized wire mesh does not leave any protruding points behind the frame. Reinforced corner plates are available for extra option.
Heras Fence Panel With Round Top
The square top temporary fence panels have weld joins in each corner. These corners are the weakest part of the panel. A round-top temporary fencing panel frame will be able to bend at the top. It will not break at the top corners, stronger than four tubes made up frame.
Quality Heras Panels For Superior Performance, Durability
Our Heras fence panels are ideal for use on construction sites. Normal dimensions are 2.0m high x 3.5m wide. The mesh infill is designed to allow wind to pass through the panels keeping the fencing sturdy in the most testing of weather conditions. The pre-galvanized finishing keeps the panels not rusting.
Econo Lightweight Round Top Panel
Welded-in bottom corner pieces for more sturdiness.
- Dimension: 3500 x 2000 mm
- Frame Tube: Ø38 mm x 1.5mm
- Mesh width: 132.5 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Standard Lightweight Round Top Panel
Smaller mesh size, stronger and makes the span more rigid.
- Dimension: 3500 x 2000 mm
- Frame Tube: Ø38 mm x 1.5mm
- Mesh width: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Heavy Duty Round Top Panel
Made of thicker steel wires, stronger and more stable.
- Dimension: 3500 x 2000 mm
- Frame Tube: Ø38 mm x 1.5mm
- Mesh width: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø3.2mm
ANTICLIMB Round Top Panel
Steel mesh grid is smaller, anticlimb and high protective.
- Dimension: 3500 x 2000 mm
- Frame Tube: Ø38 mm x 1.5mm
- Mesh width: 43 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Horizontal Reinforced Round Top Panel
Frame reinforced of additional horizontal stabilizing tube.
- Dimension: 3500 x 2000 mm
- Frame Tube: Ø38 mm x 1.5mm
- Reinforcement pipe: Ø38 mm
- Mesh width: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Vertical Reinforced Round Top Panel
Frame reinforced of additional vertical stabilizing tube.
- Dimension: 3500 x 2000 mm
- Frame Tube: Ø38 mm x 1.5mm
- Reinforcement pipe: Ø38 mm
- Mesh width: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Horizontal Stabilizing Anticlimb Roundtop Panel
Frame reinforced and smaller mesh infilling.
- Dimension: 3500 x 2000 mm
- Frame Tube: Ø38 mm x 1.5mm
- Reinforcement pipe: Ø38 mm
- Mesh width: 43 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Vertical Stabilizing Anticlimb Roundtop Panel
Vertical tubular reinforcement and anticlimb.
- Dimension: 3500 x 2000 mm
- Frame Tube: Ø38 mm x 1.5mm
- Reinforcement pipe: Ø38 mm
- Mesh width: 43 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Econo Lightweight Square Top Panel
Openwork construction fence with rectangular tubular frame.
- Dimension: 3500 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø25 mm x 1.2mm
- Single infilling: 132.5 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Standard Lightweight Square Top Panel
Square top panel, smaller mesh size, more dense filling.
- Dimension: 3500 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø25 mm x 1.2mm
- Single infilling: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Heavy Duty Square Top Panel
Ø3.2mm steel wires for more sturdy.
- Dimension: 3500 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø30 mm x 1.2mm
- Single infilling: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø3.2mm
Reinforced Corner Square Top Panel
Rectangular tubular frame reinforced at the four corners.
- Dimension: 3500 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø30 mm x 1.2mm
- Single infilling: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Heavy Duty Short Square Top Panel
Shorter span for where it is not possible to use a full-size fence.
- Dimension: 2200 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø30 mm x 1.2mm
- Single infilling: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø3.2mm
ANTICLIMB Square Top Panel
Higher protective barrier, resistant to climb, more stable.
- Dimension: 3500 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø30 mm x 1.2mm
- Single infilling: 43 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Horizontal Reinforced Square Top Panel
Horizontal structural strength, more resistant to overload.
- Dimension: 3500 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø30 mm x 1.2mm
- Reinforcement pipe: Ø30 mm
- Mesh width: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Vertical Reinforced Square Top Panel
Vertical frame reinforced panel for difficult operating conditions.
- Dimension: 3500 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø30 mm x 1.2mm
- Reinforcement pipe: Ø30 mm
- Mesh width: 100 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Horizontal Stabilizing Anticlimb Square Top Panel
Frame reinforced and smaller mesh infilling.
- Dimension: 3500 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø30 mm x 1.2mm
- Reinforcement pipe: Ø38 mm
- Mesh width: 43 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
Vertical Stabilizing Anticlimb Square Top Panel
Vertical tubular reinforcement and anticlimb.
- Dimension: 3500 x 2000 mm
- Vertical Frame: Ø38 mm x 1.5mm
- Horizontal Frame: Ø30 mm x 1.2mm
- Reinforcement pipe: Ø30 mm
- Mesh width: 43 x 262 mm
- Horizontal Wire: Ø3.2mm
- Vertical Wire: Ø2.2mm
How We Manufacture Heras Fence
We are a professional manufacturer of heras fence in China, with more than 7 years of experience. We have been in this field for many years and have a lot of experience in producing and marketing high-quality products.
We provide one-stop solutions for our clients. We can offer you the best service and good quality products.
Quality Guarantee
All the raw materials we use are tested before delivery by our QC department to ensure that they meet the required standards.
We have a strict quality control system, from material purchasing to product shipment.
Our QA team is responsible for checking all the raw materials before production and the incoming inspection of finished products. The products will be tested in accordance with the international standard.
We provide customized services for customers according to their needs.
Surface Treatment For You
Zinc Galvanizing
On steels, we offer both hot dip and cold galvanizing for zinc galvanizing.
Before galvanizing, metals have been soaked in a caustic bath.
Hot Dip – Steel immerses in a molten zinc bath to create durable and tough zinc alloy layers. It provides maximum corrosion protection for steel when used outdoors.
Cold – Zinc spays to steels at all angles at a controlled rate for required thickness. It provides basic corrosion protection for indoor applications.
Applications Of Heras Fence
Browse Our Product Categories
Explore more temporary fencing and construction site safety solutions from APAC.
Why Choose APAC
- Offers the safest, simplest, and most secure temporary fence solutions
- The applicable scope from construction sites to outdoor locations
- Fully temp fencing solutions with complete fencing kits
- Capability to supply both bulk orders and smaller volumes
- Assist with any questions you have about temporary fencing
- Fast and efficient delivery to the whole world
