guardrail slab grabber
APAC slab grabber makes it easy to install guardrail systems on concrete edges quickly and easily. It is completely optional to tighten the wrench on these concrete guardrail posts. In addition to being easy to install, they can fit concrete slabs of up to 36 inches in thickness with zero tools required. It is compatible with 2×4’s and 2×6’s wood boards and metal railings that are snap-on or cable-attached due to its strong and durable construction.
MOQ： 300 PCS
Quantity(pcs) | 300-500 | 500 – 1000 | >1000 |
| Est. Time(days) | 20 | 25 | To be negotiated |
● Heavy-duty – Frame constructed from carbon steel.
● Versatile – Easily attach 2X4’s or 2X6’s or string cable for perimeter guardrail barrier.
● Corrosion resistance – Hot Dipped Galvanized or powder coating surface provides an excellent finish and protection.
● Simple Install – Adjust the guardrail post open width and tighten only by the top handle rotating
● Meets and exceeds OSHA/ANSI Standards
| Materiale | Q235B |
| Trattamento superficiale | Hot-dip galvanized or powder-coating |
| Standard | Meets or Exceeds OSHA 1910, OSHA 1926.502 (b) |
| Peso | 22 lbs |
1. This slab grabber post MUST NEVER be used as anchorage point for any fall arrest system or fall protection equipment.
2. Usually used with 2” x 4” or 2” x 6” construction grade wood railing or wire scope.
3. APAC guardrail slab grabber fit the concrete slab thickness from 3” to 36”.
4. The maximum permitted spacing between the guardrail slab grabber is 8′.
5. The height of top rail is over 42” .
6. Toe boards must be a 4” nominal in vertical height from their top edge to the work surface, and must not have greater than ¼” clearance between their bottom edge and the work surface.
7. If the slopes are more than 4/ 12 (vertical/horizontal) or there is a falling hazard situation exists for tools, equipment, materials, or other substances to fall down to a lower level, the toe-boards are REQUIRED.
8. DO NOT lean or climb on the Guardrail System when it’s been installed.
● Clear up all dirt, corrosives and contaminnats on the surface of the slab grabbers after use
● Store the grabbers in a dry place that can not be affected by heat and other chemicals elements
● A formal inspection is needed every 6 months. Inspect for deficiencies including but not limited to corrosion, cracks, bent or damaged sections. Record the inspection results.
● The damaged units can be repaired ONLY by representative person or entity authorized ones.
Installation Guide of guardrail slab grabber
- Ensure the slab decking and structure can support the system and installer before you install the guardrail system.
- Work surface surfaces must be free of debris, gravel, and loose or slippery concrete surfaces that could interfere with slab grabber bearings.
- Measure and space the location of each slab grabber, no more than 8 feet between each one, or more than 12 inches from any outside or inside corner.
- Rotated the top handle in a counter-clockwise motion to open the post clamp slightly larger than the desired slab decking thickness.
- Place the clamp over the slab edge and make sure the post is positioned perpendicular to the slab surface.
- Adjust the top handle to tighten in a clockwise motion until the grabber is secure on the concrete slab. If using a torque wrench, tighten no more than 30 lbs./ft.
- Place the 2” x 4”, 2” x 6” or cable through the top rail and mid rail space on the post, use nails to secure 2” x 4” or 2” x 6”.
- The 2” x 4” or 2” x 6” can be used as toe boards if needed. The process is the same as above.
Boost Your Business with APAC guardrail system
La qualità incontra l'eccellenza
trattamento superficiale per te
Zincatura galvanica
Per quanto riguarda gli acciai, offriamo sia la zincatura a caldo che quella a freddo per la zincatura a caldo.
Prima della zincatura, i metalli vengono immersi in un bagno caustico.
Hot-Dip Galvanized – Steel immerses in a molten zinc bath to create durable and tough zinc alloy layers. Garantisce la massima protezione contro la corrosione dell'acciaio quando utilizzato all'esterno.
Cold-Dip Galvanized – Zinc spays to steels at all angles at a controlled rate for required thickness. Fornisce una protezione di base contro la corrosione per applicazioni in interni.
Inoltre, forniamo servizi personalizzati e possiamo scegliere diversi metodi di trattamento in base alle esigenze dei clienti.
Related Solutions and Products
APAC BUILDERS EQUIPMENT LTD. has armed worksite safety professionals with best-in-class fall protection solutions in the past decade. With our safety experts engineering and testing our product lines rigorously following government laws, you can be confident you are getting the right solution to protect the people who need it most. Count on our reliable customer service to deliver everything you need. “Leave No Doubt” is our motto when it comes to worker safety.
Italian 
English 
Swedish 
Arabic 
German 
French 
Spanish 
