Shoring Props
Shoring props are retractable tubular steel props consisting of an outer tube, an inner tube, and adjustable fittings. The inner and outer tubes are usually fitted with a flat metal plate at one end to provide additional support areas.
APAC’s adjustable shoring prop also called Acrow Prop, adjustable jack post, adjustable steel post, adjustable steel column, adjustable steel prop, adjustable steel shoring post, and even the lally column. They are designed to support a range of formwork and falsework applications, floors, ceilings, openings, and temporary beams.
Shoring Props : Made in China，Used Worldwide
APAC shoring prop strictly conforms to BS4360 and EN1065 standard, we also provide you simple and innovative design, and use high yield strength steel materials.
Our shoring props are available in five sizes covering a range from 1040mm to 4900mm with axial compression working load limits ranging from 7kN to 42.5kN. The outer tube diameter of the shoring prop is 60.3mm, the head and base plates normally are 150x150x6mm, on the center of the plate has a 38mm diameter hole.
APAC shoring prop is fast to erect in three simple steps, and are able to be handled by a single person, ensuring reliable and economical formwork and scaffolding applications.
Shoring Prop: Increase the Load, Decrease the Cost
Scaffolding accessories heavy duty shoring props
Telescopic Steel Shoring Jack Post
galvanized steel props scaffolding
heavy duty adjustable shoring posts
concrete lightweight shoring prop
Formwork Adjustable Steel Shoring Props
Your Well-made Shoring Props
Shoring Props are used in the construction industry for temporary support of ceilings, walls and trenches (shoring). To install, first stand the shoring prop into the work area, adjust the height so that it almost fills the gap, and insert the pins to lock the inner and outer shoring prop tubes. Any remaining gap is then closed with screws until it is securely fastened to the support area.
Shoring props are mostly used for shoring: temporary support during building repair or alteration work, rather than scaffolding: an access platform for workers. Typical use is to support existing horizontal beams for table moldings.
You can have an inner tube in diameter of 40mm and 48mm for APAC’s shoring prop as well. When the inner tube diameter is 40mm/48mm, the outer tube will be 48mm/56mm.
APAC’s shoring prop jacks are widely used in scaffolding and concrete formwork support in Europe. The height of the props is adjustable, you can ask APAC to design and customize the height according to your slab /floor height.
The components of the shoring prop include prop outer tube, inner tube, G pins/ straight pins, top and bottom steel plates, prop nuts and handles etc.
APAC shoring prop can be used for multiple applications, such as the construction of slabs, pier caps, tunnel vaults, bridge decks, or any other concrete structure that requires the use of falsework.
Post Shore Prop Size to UK Concrete Construction
Item No. | Height | Weight (kgs) | Wall Spessore (mm) | Diameter of the tube(mm) | ||
Closed (mm) | Extended (mm) | kgs | Outside | Inside | ||
No.0 | 1040 | 1830 | 12.95 | 3.6/3.2 | 60 | 48 |
No.1 | 1750 | 3130 | 18.64 | 3.6/3.2 | 60 | 48 |
No.2 | 1980 | 3350 | 19.55 | 3.6/3.2 | 60 | 48 |
No.3 | 2590 | 3960 | 22.57 | 3.6/3.2 | 60 | 48 |
No.4 | 3200 | 4880 | 26.36 | 3.6/3.2 | 60 | 48 |
Steel Material S235 Or S355 Upon Option. Top and Base Plate : 150x150x6mm. Special size avaliable.
Middle Duty Post Shores to United States of America
Item No. | Height | Weight (kgs) | Wall Spessore (mm) | Diameter of the tube(mm) | ||
Closed (inches) | Extended (inches) | kgs | Outside | Inside | ||
PS-1F | 5’1″ | 9′ | 9.3 | 2.00 | 56 | 48 |
PS-2F | 6′ | 11′ | 9.7 | 2.00 | 56 | 48 |
PS-3F | 8′ | 13′ | 11 | 2.00 | 56 | 48 |
PS-4F | 10′ | 15′ | 15.9 | 2.00 | 56 | 48 |
Steel Material S235 Or S355 Upon Option. Top and Base Plate : 110x110x5mm. Special size avaliable.
Heavy Duty Post Shores to United States of America
Item No. | Height | Weight (kgs) | Wall Spessore (mm) | Diameter of the tube(mm) | ||
Closed (inches) | Extended (inches) | Outside | Inside | |||
PS-1B | 5’9″ | 10’3″ | 17.2 | 2.5/3.6 | 60 | 48 |
PS-2B | 6’6″ | 11′ | 18.8 | 2.5/3.6 | 60 | 48 |
PS-3B | 8’6″ | 13′ | 20.6 | 2.5/3.6 | 60 | 48 |
PS-4B | 10’6″ | 16′ | 25.4 | 2.5/3.6 | 60 | 48 |
Steel Material S235 Or S355 Upon Option. Top and Base Plate : 150x150x5mm Special size avaliable
Quality assurance
Choose your material and surface treatment
We usually use S235 steel or S355 steel, both of which are commonly used in the industry. S355 steel will make the shoring prop have a better loading rating, so we recommend you use S355 steel.
APAC provides OEM service for the shoring prop, the surface treatments you can find here are hot-dipped galvanized, galvanized steel, painting, and powder coated.
APAC is able to offer you shoring prop based on the weight load requirements. You can not only find the normal light-duty props. Other medium-duty and heavy-duty steel acrow props are available too.
What Can We Offer ?
Ponteggi Ringlock
Le impalcature APAC Ringlock vengono utilizzate per tutte le forme di strutture di accesso e supporto nei settori dell'edilizia, dell'aviazione, degli eventi, delle costruzioni edili, della cantieristica navale, della manutenzione industriale e delle costruzioni offshore.
Torri di ponteggio
Le torri di impalcatura APAC, chiamate anche torri di impalcatura industriali 3T, sono realizzate in materiali Alloy 6061 T6 o Alloy 6063 T6. Sono rigorosamente conformi allo standard europeo EN 1004 e allo standard australiano/neozelandese AS/NZS 1576.
TRAVE H20
L'APAC ritiene sempre che i valori del modulo di resistenza e del momento geometrico di inerzia si applichino alle travi H20 per casseforme in calcestruzzo nuove o usate. E bisogna aggiungere un fattore di sicurezza analogamente aumentato per le travi fortemente deformate.
Guardie in mattoni
APAC vende le uniche protezioni monoblocco in plastica per mattoni, realizzate in una fabbrica certificata IS9001 in Cina. Siamo un fornitore professionale con oltre 7 anni di esperienza, puoi acquistare direttamente da noi.
Etichette per impalcature
I tag per impalcature APAC sono spesso progettati per proteggere i lavoratori, ma anche i passanti. I tag per impalcature da costruzione impediscono gli intrusi e informano i lettori che l'ingresso può causare lesioni o morte, assicurando che il sito rimanga sicuro anche in assenza di lavoratori.
Rete per impalcature
APAC è uno dei migliori fornitori di prodotti per la sicurezza nei cantieri edili in Cina. Ci impegniamo a fornire gamme di reti per impalcature di alta qualità che soddisfano gli standard di sicurezza.
Altre domande?
When you are looking for shoring props for sale, APAC would be your best choice. We don’t only ensure you the quality by a strict quality control system, but also bring you more benefits in professional consulting. price, and service.
If you would like a door-to-door delivery service, simply tell us your address. APAC has a wide international forwarder and agents, we are able to send the shoring prop to your door.
Contact us now, let APAC help you get more shoring prop business, we believe it will be a win-win relationship for us.
Italian 
English 
Swedish 
Arabic 
German 
French 
Spanish 
