Ringlock Ledger is the horizontal component of the Ringlock scaffolding System.
Ledgers are connected to the vertical Standards using the cast end with the captive wedge, which can be used as horizontal support for planks or act as guardrail edge protection. This connection is extremely strong and prevents the possibility of loose components.
APAC has been offering Hot Dipped Galvanized Ringlock Ledger Used For Construction Scaffolding for over 10 years. Our Ring lock System strictly conforms to EN 12810/EN12811, ANSI/SSFI SC100-5/05, AS/NZS 1576 etc standard.
Q235 Hot-Dipped Galvanized Ringlock Ledger
Customizable cast steel ringlock ledger head
ringlock double ledger / truss ledger
APAC Ringlock Scaffolding System with hot dip galvanized surface treatment is easy to install & disassemble. Compared to steel tubes with couplers, ringlock scaffold system is 2~3 times installation & dismantling efficiency higher than the cuplock scaffolding system, but only with half steel usage and 75% investment cost.
Our Ringlock system with 200 KN high loading bearing capacity is buyers’ safe & professional choice, providing the users with higher safety & benefits.
Learn more about the Scaffold Ledger
Defination And Bascis
Why choose APAC Ringlock Scaffolding?
USA & CANADA TYPE RING LOCK SYSTEM
EUROPEAN STANDARD ALLROUND RINGLOCK SCAFFOLDING
STANDARD FOR HEAVY DUTY SHORING SCAFFOLDING SYSTEM
Ringlock ledgers Supplied by APAC
APAC provides scaffolding to Unite States and Canada. We also provide scaffolding to Singapore, New Zealand, Australia, the size of the ledger normally is metric size, such as 1.4m, 1.57m, 2.57m. etc.
There are several different types of ledger heads for your choice. We can also produce your design if the CAD drawing or sample is offered.
ringlock scaffolding in construction
The ringlock Scaffolding system is popularly used in construction, formwork support, Facade scaffolding, bridge & tunnel, Stairway access, mobile work scaffolding tower, trenches and emergency structure, stage construction etc. and it’s welcomed by construction & decoration companies, petrochemical industry, media & advertising companies and other users.
ledger/horizontal Wholesale Supplier
APAC manufactures the high-quality Ringlock scaffolding ledger, the surface treatment is hot-dip galvanized. Painted or powder-coated Ringlock scaffolding Standard is also workable based on customer’s requirements.
With APAC, you will have good quality welding Ringlock scaffolding Standard, which is based on EN 1090-1 and ISO 3834-2 standard.
If your project just needs our Ringlock scaffolding Standard, please don’t hesitate to contact us. Free samples and competitive price will be afforded.
Boost Your Business with APAC ringlock LEDGER
Precision casting and sand casting are two ways in the casting industry, each has its own advantages and disadvantages, the following is an introduction to the differences between precision casting and sand casting.
1) Precision casting.
First make wax parts is the end of the casting, and then hang slurry on the wax mold, sticky sand, so that it forms a strong shell on the outside of the wax parts, the next heating, the wax drain, pouring steel or aluminum water into the empty shell, cool down and vibrate the shell, you can get the desired casting. High quality of the external appearance of fine castings and precise dimensions.
Sand casting, also known as sand turning, first made of wood to make the casting, usually the material selected is wood, but also useful metal type, the wood type buried in the sand, and then remove the wood type, so that the sand type into a cavity. Pour the steel out of the cavity, after cooling is the desired style of casting. Sand castings are poor in external quality, the size is not as accurate as fine casting, but the cost is lower than fine casting.
If the batch is very large, it is better to accept die-casting mold, high output, low cost per piece; compared with precision casting mold and sand casting mold, die-casting mold cost is higher.