First-Rated Ringlock Scaffold Exporting Globally Over 10 Years

Yes, we could offer the sample for you if we have stock, but the freight should be paid by buyer.

It depends on your quantity. Normally, the estimated production and delivery time is about 2–4 weeks after payment. For large orders, the delivery schedule can be discussed according to the order plan.

We can support payment by bank account. Normally, 30% deposit in advance and 70% balance upon copy of B/L. For bulk orders and long-term cooperation, payment terms can be negotiated.

The ringlock scaffolding consists of a tube, plate, collar, and planks. The tube is made of aluminum or steel.

The used steel grade is hot rolled steel. If the construction area has overhead cables, a fiberglass wound tube in a polyester matrix or nylon can be used.

Aluminum alloy is also used in ringlock scaffolding. It is lighter than steel and highly durable. For the board, steel, aluminum, or wood planks can be selected according to project requirements.

This system consists of three main parts: rosette, base collar, and wedge pin. Vertical and horizontal braces are used for linking.

• First, the base plates are placed on the ground or surface.
• Then the vertical braces are mounted.
• The horizontal braces are placed between the vertical elements in order to lock the locking mechanism.
• The next phase is to mount other horizontal braces on the locked frame.
• Then vertical braces are mounted by using the upper adjustment shafts to build the upper structure of the system.

Figure 9 - Only hammer is enough to assemble ringlock scaffolding

Assembling ringlock scaffolding is very easy and less expensive. It demands less labor cost and no additional tools. You can set up the entire structure with just one tool: a hammer.

We have demonstrated the assembly process of ringlock scaffolding in the following video.

Both scaffolding systems are made of prefabricated components with specific functionalities. The most significant difference between the two lies in the way they are connected.

Figure 10 - Ringlock Scaffolding Connection

Figure 11 - Kwikstage Scaffolding Connection

• Ringlock scaffolding is hot-dip galvanized while Kwikstage is normally powder-coated.
• Ringlock scaffolding has more components to share the pressure, resulting in a more stable structure.
• The erection time of Ringlock scaffolding can save over 50% than Kwikstage scaffolding for the same size and height of the assigned structure.

APAC is a factory-direct supplier. The final price depends on order quantity, product specification, surface treatment, packaging requirement and destination. Larger quantities usually help reduce the unit price. For project orders or long-term cooperation, our team can provide a professional quotation according to your actual requirements.

Yes. APAC manufactures ringlock scaffolding according to international standards and performs quality inspection during production. We also provide after-sale communication and support. The warranty does not cover damage caused by misuse, negligence, improper storage or improper operation.

Hot-dip galvanized steel comes with strong protective zinc coating. This process makes steel corrosion-resistant to ensure a longer life span.

The life span of ringlock scaffolding is quite strong. With proper use and maintenance, hot-dip galvanized ringlock scaffolding can survive more than 20 years. Hot-dip galvanizing coating is also self-maintaining, so the maintenance cost of ringlock scaffolding is relatively low.

OSHA has some specific safety guidelines for scaffolding, including capacity requirements, construction safety requirements and scaffold planking requirements.

• The scaffold must be capable of bearing four times the recommended weight.
• The scaffold should be designed by a certified person.
• The platform should be fully planked and decked.
• Scaffold planks must be able to bear four times the intended load.
• The fabricated planks and platforms should be used following the manufacturer’s instructions.

Yes. As a leading scaffolding system manufacturer in China, APAC has expertise in ringlock scaffolding. We are equipped with designers, engineers, and experienced workers.

• We ensure proper metal management in the manufacturing steps.
• Our products are produced by TS EN 10219-1 certification and mechanical tests.
• According to EN ISO 3834-3 standards, we use gas metal arc welding.
• We always follow the rules and regulations applied by OSHA.

If you have any queries or any project in your mind, send us an inquiry. A dedicated expert on Ringlock scaffolding will contact you shortly.