Formwork Accessories
- One-stop sourcing: accessories + beams + plywood
- Selection support: match parts to your formwork system (Doka/Peri/Euro/Aluminium)
- Factory-direct pricing for repeat orders (better cost control for distributors and contractors)
- Audit-ready quality & test documentation (MTC and test reports available)
What are formwork accessories
Formwork accessories are the hardware parts and components used to connect, align, tighten, and support formwork during concrete pouring, so the form stays in the right position and shape until the concrete gains strength. They include items such as tie rods, nuts, wing nuts, anchor plates, clamps, wedges/pins, water stoppers, cones/sleeves, and beam fixings, and they’re essential for safety, accuracy, and faster assembly/disassembly on site.
types of formwork accessories
Manufactured with high-strength steel, ductile iron, or durable engineering plastics, our accessories are compatible with traditional timber formwork as well as leading modular systems. With strict quality control, standardized sizing, and corrosion-resistant finishes, APAC formwork accessories deliver reliable performance across repeated construction cycles.
Whether you are a contractor, distributor, or rental company, APAC provides flexible OEM/ODM options, competitive pricing, and consistent supply to meet your project requirements.
Tie Rod (Formwork Tie Bar)
High-tensile steel rod connecting opposite formwork panels; resists concrete pressure; available in 15/17mm diameter.
Waler Plate / Bearing Plate
Distributes tie-rod load over a larger area; protects formwork panel from deformation.
Wing Nut / Anchor Nut
Works with tie rods to tighten and lock panels; forged steel; available with waler plate or fixed flange.
Plastic Cone / Spacer
Maintains wall thickness and ensures consistent spacing; removable or break-off type; used with tie rods.
Water Stopper Nut
Prevents leakage through tie holes in water-retaining structures; cast iron or ductile iron body.
Rapid Wedge Clamp
Quick-release connector for fixing soldiers, walers, or panels; speeds up assembly and dismantling.
T-Bolt & Wing Nut Set
Fastening device for securing formwork accessories; available in various lengths and threads.
Formwork Pin & Wedge
Locks panel joints or aligners; simple hammer-in connection; ideal for column and beam formwork.
Adjustable Column Clamp
Fastens and tightens rectangular column formwork without tie rods; steel construction; adjustable length; fast assembly.
Formwork Alignment Clamps
Aligns and connects two adjacent formwork panels to maintain straight joint lines; provides fast tightening with wedge or screw system; improves concrete wall flatness.
Adjustable Shuttering Clamps
Multi-range clamp for plywood/steel shuttering; replaces tie rods in certain applications; ideal for quick assembly around beams, slabs, and walls. Steel construction with adjustable sliding design.
Peri Concrete Column Clamps
Compatible with PERI column formwork; applies high clamping force to keep column panels tight under fresh concrete pressure; hot-dip galvanized for long service life.
Adjustable Column Clamp
Vertical support under slabs or beams; height adjustable; load capacity up to 30 kN.
Adjustable Tripod Stand
Keeps props stable before concrete pour; galvanized finish for corrosion resistance.
U-Head Jack / Fork Head
Fits on top of props to carry H-beams or primary girders; screw adjustment for leveling.
Base Jack / Adjustable Base Plate
Supports props or standards on uneven surfaces; provides height adjustment and stability.
Push-Pull Prop (Adjustable Strut)
Aligns and braces wall or column formwork; adjustable length with turnbuckle.
Turnbuckle / Pipe Brace
Used for fine alignment of wall or column formwork; easy tension adjustment.
Plastic Formwork Panel
Lightweight and corrosion-free; ideal for fast assembly and high reuse cycles.
Plywood Formwork Panel
Film-faced or phenolic-coated surface for smooth concrete finish; reusable 5–10 times.
Steel Formwork Panel
Heavy-duty alternative to plywood; ideal for repetitive pours; high dimensional accuracy.
Why Choose APAC formwork accessories
Formwork accessories are small parts that carry big consequences: alignment, leak control, pour stability, and stripping efficiency. Our range is built to help procurement teams and site crews source compatible parts faster, reduce mis-matched components, and keep concrete forming work moving.
One-stop sourcing for tie rod systems, clamps, beams & plywood
Instead of splitting RFQs across multiple vendors, you can consolidate key consumables and repeat-order items in one place.
Tie rod system components: tie rods, wing nuts/anchor nuts, waler plates, water stoppers, sleeves & cones
Clamps & clips: wedge lock clamps, alignment clamps, spring clips/rapid clamps, tekko clips, shuttering clamps
Formwork beams and faces: H20 beams, aluma beams, film-faced plywood
Formwork System compatibility
We organize products around real site systems, so you spend less time cross-checking whether parts will actually fit together.
Euro Form system accessories (pins, wedges, ties, hooks, profiles)
Aluminium formwork accessories (wedges/pins, walers and related parts as listed)
Doka and Peri-type clamps and related clamp options
Quality control & documentation support for approvals
When projects require traceability and proof, we reference QC controls and provide supporting files mentioned in the page content.
ISO 9001 manufacturing quality control (as referenced)
Mock-up inspection for compatibility (tie rods, nuts, accessories fit-up)
MTC and test reports available for orders
Trusted by contractors worldwide
Applications
Robust accessories ensure proper alignment, improved assembly efficiency, safer working conditions, and consistent concrete quality — even under challenging site conditions. APAC formwork accessories are widely used in:
High-rise building core walls & shear walls
Residential and commercial slab construction
Bridge piers and highway infrastructure
Industrial columns and beams
Basement wall retaining structures
Tunnels and water-retaining tanks
Prefabricated and modular shuttering systems
formwork accessories | Frequently Asked Questions
1. Are APAC formwork accessories compatible with other brands?
Yes. Our sizing, thread diameter, and connection systems are compatible with common industry standards, including PERI, Doka, Sateco, Meva, and traditional shuttering systems.
2. What surface treatments are available?
We offer hot-dip galvanizing, electro-galvanizing, and powder-coated finishes. Surface treatment can be selected based on climate, corrosion risk, and project duration.
3. Can I customize dimensions or threaded specifications?
Absolutely. We support OEM/ODM customization, including length, pitch, head style, and branding. Feel free to request drawings or samples.
4. How many times can the accessories be reused?
Absolutely. We support OEM/ODM customization, including length, pitch, head style, and branding. Feel free to request drawings or samples.
5. Do you provide inspection reports or certificates?
Yes. We can provide material certificates, tensile test results, surface coating thickness reports, and MTCs upon request.Yes. We can provide material certificates, tensile test results, surface coating thickness reports, and MTCs upon request.
6. What is your typical lead time?
Standard products ship within 15–30 days depending on order volume and customization requirements.
7. Do you supply accessories as complete packages?
Yes. We can bundle tie rods, nuts, plates, and cones into packaging sets for distributors or rental companies.
English 
Swedish 
Italian 
Arabic 
German 
French 
Spanish 
Finnish 
Estonian 
Russian 
